ISL Petoguard Tape ST 200mm x 10m

Product Description - PCS PetroGard Tape ST (Standard Temperature) PetroGard Tape ST is an integral component of the PCS PetroGard System. PetroGard Tape ST is based upon a Non Woven polyester fabric which has been fully impregnated & saturated with a petrolatum compound, blended with inert fillers, corrosion inhibitors & wide spectrum biocide. PetroGard Tape ST is manufactured in accordance with AWWA Standard C217-04. Product Characteristics PetroGard Tape ST exhibits wide ranging resistance to acids, alkalis & bacteria. PetroGard Tape ST will not polymersise or oxidise & its non hardening properties allow the product to accommodate both substrate vibration & movement. Product Uses Pipeline: Above ground, below ground & submerged pipe & fittings Other: Tie Rods, starter bars, bond breaker, slipform release tape, roof sheet isolation tape Product Properties Property Test Method Value Tear Strength / Length AS2001.2.8 (Elmendorf Grab) 35.8 N Tear Strength / Width AS2001.2.8 (Elmendorf Grab) 32.9 N Breaking Strength / Length AS2001.2.3.2 (Elmendorf Grab) 186 N Breaking Strength / Width AS2001.2.3.2 (Elmendorf Grab) 58.2 N Thickness AWWA C217-04 sec.5.2.2.2 (Mod) 1.4mm (avg.) Water Vapour Transmission ASTM E96 0.12/ng/Pa s m2 Holiday Testing ASTM D149 10kV (Recommended) Application Temperature -10 to +50ºC Service Temperature -10 to +50ºC Service Life 30 Years + Shelf Life 30 Years +